Brachiosaurus Family
Give your little dinosaur lover a world to get lost in. A gentle giant keeps watch over two new arrivals, bringing a friendly dinosaur family into their room. Gather these Brachiosaurus wall stickers in a favourite corner, above a play table or beside a doorway, then arrange the greenery around them. The fabric stickers lift and reposition, so you can change the scene as your child’s dinosaur world grows.
Our designers pair soft watercolour-style washes with fine pencil detail, and tuck little stories into the artwork to delight curious kids. In this pack, the beetles are having their annual picnic on a leaf floating in a hollow log. Seeds and nuts are on the menu, and nobody’s in a hurry to finish lunch.
Add more characters and scenery from Among the Dinosaurs, our full dinosaur wall sticker range, to build a bigger scene. Each pack is sold separately.
40 stickers (approx sizes):
- Mother Brachiosaurus: 1185 × 715mm
- Hatching Baby Pair: 465 × 350mm
- Tree Stump: 190 × 100mm
- 4 Puddles: 140–155mm
- 2 Rocks: 120–130mm
- 12 Leaves, Ferns & Grass: 45–80mm
- 12 Mini Nature Scenes: 35–120mm
- 2 Dragonflies: 70–100mm
- Amber with Insect: 45 × 35mm
- Vine Branch: 900 × 165mm
- Rock Ledge: 250 × 65mm
- 2 Winged Insects: 55 × 30mm
Some designs come in pieces: 9 for the Brachiosaurus, 4 for the hatching pair and 4 for the vine branch. Together, these make three of the 40 stickers in your pack. Sizes shown are for the finished designs.
Our wall stickers are made from removable, repositionable fabric, so you can change things around as you go. A little to the left? A bit further apart? There’s room to play. We use a fine-weave fabric, not vinyl. It doesn’t stretch, so each piece keeps its shape as you move it around. And you can change your mind long after day one. The adhesive doesn’t harden and set, so your stickers are designed to come off years later, too.
New room, new home, or a rental you want to make your own? Your favourite stickers can come with you. Keep the backing paper for storing them between moves.
Mike and Rach, who founded Tinyme in 2006, have wall stickers that have moved with them (and their six kids) through three houses and been in use for well over ten years.
Wall preparation and paint condition matter, especially when removing stickers from poorly prepared paint. The FAQs and Instructions cover which walls to use, application, removal and storage.
Three dads. Fifteen kids. A true story… Tinyme started in a spare bedroom back in 2006. Baby number two had just arrived, so “spare” was stretching it. World Headquarters by day. Nursery by night.
Nick, who’d met Mike (the spare bedroom dad) studying design, joined soon after. Things took off: more orders, more machines and more babies. Then their friend Ben made the obvious career move… leaving Goldman Sachs, where he was a Senior Asset Funds Manager, to join Team Tinyme… and the highly lucrative and proven market of custom-made personalised kids’ products. And the kid count jumped by four.
These days, Tinyme is a tight-knit team of designers, developers, engineers, makers and all the friendly people who keep everything humming as we carefully custom-make every order. We’ve now got two production studios: one in Melbourne and one in the UK’s Midlands.
Our designers sweat the small stuff: the watercolour washes, fine pencil details and how all the pieces work together on a wall. Then our production team prints the art onto removable, repositionable fabric, die-cuts the pieces and packs your stickers. We even make the boxes they arrive in. Yes, the boxes too. From the artwork to the packed box, we do it all in-house. You get to do the fun bit: making the room theirs.
Warning: Tinyme wall stickers are designed for decoration only and are not to be considered as a toy. Please ensure that they are out of reach of children under 3 years of age, especially children in a cot, crib or bed to avoid a possible choking hazard.
1. Prepare your wall
Choose a clean, dust-free, flat surface. Some textured surfaces may also be suitable. Allow freshly painted walls to dry for three weeks before applying.
2. Plan and place
Decide on your layout, then carefully peel each sticker from its backing paper and place it on the wall.
3. Smooth into place
Gently rub over the sticker with a soft cloth or the back of your hand, working from the centre outwards to push out air bubbles.
4. Remove and store
Carefully lift a corner, fold the sticker back on itself and slowly peel it off. Take care if the wall was poorly prepared before painting. If you are concerned, or if the wall offers resistance, heat with a hairdryer while removing. Keep the backing paper to store your stickers.
Tinyme wall stickers are designed for decoration only and are not to be considered as a toy. Please ensure that they are out of reach of children under 3 years of age, especially children in a cot, crib or bed to avoid a possible choking hazard.
Our wall stickers are printed on a fine-weave fabric, not vinyl. The fabric doesn’t stretch, so the pieces keep their shape when you lift and move them.
The removable, repositionable adhesive gives you room to play with the layout. Bring the pieces closer together, leave a little more space between them, or change things around when the room needs a refresh. You don’t have to settle on the final spot first time.
Yes. A little to the left? Try it. Gently lift the sticker and put it back where you want it. Our fine-weave fabric keeps its shape as you move it, so you can keep adjusting until the arrangement feels right.
That takes some of the pressure off decorating. You can work out what you like on the wall, then change it again when the furniture moves or your child has other ideas.
Yes. Our fabric wall stickers can be removed and reused, whether you’re swapping rooms or moving house. The adhesive doesn’t harden and set, so they’re designed to come off years later, too.
Keep the backing paper and put the stickers back on it between moves. Keeping the adhesive free of dust and dirt helps you look after them for the next wall.
Mike and Rach, who founded Tinyme in 2006, have wall stickers that have moved with them and their six kids through three houses, and been in use for well over ten years.
They’re designed to be removable, but the paint and preparation underneath matter too. Take extra care with loose paint or walls that were poorly prepared before painting.
When you’re ready to take them down, carefully lift a corner, fold the sticker back on itself and slowly peel it off. If you’re concerned, or the wall offers resistance, use a hairdryer while removing it. Keep the backing paper if you’d like to store and reuse the stickers.
They stick to most clean, flat surfaces, and some textured surfaces too. Make sure the wall is clean and free of dust before you begin. The texture, paint finish and condition of the wall all matter.
For freshly painted walls, allow three weeks for the paint to dry before applying.
Start with a clean, dust-free, flat surface. If the wall has just been painted, allow three weeks for it to dry first.
Decide roughly where you’d like the pieces, then carefully peel each sticker from its backing paper and place it on the wall. Smooth it with a soft cloth or the back of your hand, working from the centre outwards to push out air bubbles. You can gently lift and reposition a piece as you go.
Place the stickers out of reach of children under three, especially around a cot, crib or bed. They’re decoration, not toys.
We do. Tinyme started in a spare bedroom in 2006 and grew into a business run by three dads with fifteen kids between them.
Our in-house designers develop the artwork and room arrangements, thinking about how the pieces work together and helping you picture them in your own space.
Then our production team prints, die-cuts and packs your stickers. We even make the boxes they arrive in. Yes, the boxes too. From the artwork to the packed box, we do it all in-house, with production studios in Melbourne and the UK’s Midlands.
Yes, with placement in mind. Tinyme wall stickers are designed for decoration only and are not to be considered as a toy. Please ensure that they are out of reach of children under 3 years of age, especially children in a cot, crib or bed to avoid a possible choking hazard.
Login and Registration Form